+33 (0)1 48 48 39 76 spain nl.png

Contact us

  • SCALP
  • ZI de la Poudrette 8-14, Allée de Bruxelles 93 320 Les Pavillons sous Bois France
  • Tel. +33 (0)1 48 48 39 76
  • scalp@scalp-france.fr
VERNAEAU PU 16 Zoom

VERNAEAU PU 16

Send to a friend

VERNAEAU PU 16

VERNAEAU PU 16

Permanent anti-graffiti protection - polyurethane resin base in aqueous phase. Colourless varnish, matt or gloss finish.

VERNAEAU PU 16 is designed for protection against graffiti and marks on porous surfaces, concrete, cement, bricks, paint, stones, thick and medium plasticized coatings, wood, hydraulic and lime coatings.

Recipient :

* Required fields

Cancel or 

Permanent anti-graffiti protection - polyurethane resin base in aqueous phase. Colourless varnish, matt or gloss finish.

VERNAEAU PU 16 is designed for protection against graffiti and marks on porous surfaces, concrete, cement, bricks, paint, stones, thick and medium plasticized coatings, wood, hydraulic and lime coatings.

Method of use :

  • Dilution: Ready to use, after mixing of component parts.
  • Tools: Roller, could be sprayed with an airless spray gun.
  • Method: Pour all the hardener into the resin. Mix well with an agitator for a minimum of 5 minutes to get a perfectly homogeneous solution. The initial surface should be clean and dry. Apply VERNAEAU PU 16 to the surface to be protected in a crossing coat and avoiding overuse and over-colouring. It is essential to apply the second coat while the first coat is still fresh (average time period: one hour). Mixture life span: 3 hours.
    Graffiti Cleaning: For a period of 15 days: apply SCALP ANTI GRAFFITI 49 then wipe with a dry cloth or rinse with pressure equipment (i.e. Karcher). Remove obstinate marks with SCALPNET EDJ 28. For a period of 1 to 2 months: apply SCALPEX AL 23 in circular movements, leave to act for10 to 15 minutes then rinse with pressure equipment. Protection will always be effective against other attacks. For the protection of very porous surfaces it is advisable to apply a coat of SCALP PRIMER 36 in order to attenuate the wet appearance of the surface.
  • Application Time: Apply VERNAEAU PU 16 in the 3 hours following mixture. Total polymerization of the surface will be effective 72 hours after the last coat.